Validation of Surface Height From Shuttle Radar Topography Mission Using Shuttle Laser Altimeter

Principal Investigators:

Guoqing Sun, Jon Ranson (GSFC), V. I. Kharuk (SFI), Katalin Kovacs (SSAI)

Spaceborne Interferometric SAR (InSAR) technology used in the Shuttle Radar Topography Mission (SRTM) and spaceborne lidar such as Shuttle Laser Altimeter-02 (SLA-02) are two promising technologies for providing global scale digital elevation models (DEMs). Each type of these systems has limitations that affect the accuracy or extent of coverage. The surface height measured independently by SRTM and SLA-02 was cross-validated. SLA data was first verified by field observations and examinations of individual lidar waveforms.

The geolocation accuracy of the SLA height data sets was examined by checking the correlation between the SLA surface height and the SRTM height at 90m resolution, while shifting the SLA ground track within its specified horizontal errors. It was found that the heights from the two instruments were highly correlated along the SLA ground track, and shifting the positions did not improve the correlation significantly. Absolute surface heights from SRTM and SLA referenced to the same horizontal and vertical datum (World Geodetic System 84 Ellipsoid) were compared. The effects of forest cover and surface slope on the height difference were also examined. After removing the forest effect on SRTM height, the mean height difference with SLA-02 was near zero. It can be further inferred from the standard deviation of the height differences that the absolute accuracy of SRTM height at low vegetation area is better than the SRTM mission specifications (16m). The SRTM height bias caused by forest cover needs to be further examined using future spaceborne lidar (e.g. GLAS) data.

Example publication: Sun, G., K. J. Ranson, V. I. Kharuk, and K Kovacs, 2004, Validation of surface height from Shuttle Radar Topography Mission using Shuttle Laser Altimeter, Remote Sensing of Environment, Vol. 88, Iss. 4, pp. 401-411.